FORD RACING Z304DA HEADS
I ONLY HAVE TWO SETS AT THIS PRICE FORD RETAILS THESE FOR $2098.00 PER SET Assembled Head Features
Premium stainless steel 2.02" intake M-6507-A304 and 1.60" M-6505-B304 exhaust valves
Uses M-6513-BH Beehive style valve springs with machined retainers and machined valve locks. Most hydraulic cams can be used with these springs. 130lbs @ 1.800", 293lbs. @ 1.200" and CB @ 1.085"
Includes laser cut guide plates M-6566-Z304D for use with 5/16" pushrods and 7/16" rocker studs
Requires M-6564-F351 roller rocker arms (not included)
Check piston to valve clearance including radial valve clearance before installing these cylinder heads on your engine
Cork valve cover gasket recommended.CALL 1-800-236-1156 TO ORDER
|
FR500 INTAKE M-9424-T46
M-9424-T46*
Kit offers substantial improvement in both low- and high-RPM performance
Variable Geometry design, which changes the runner length according to the RPM of the engine
Long runner setting at low RPM flattens the torque curve and overcomes the lack of low-end torque common on 4V engines
Short runner setting promotes high RPM power
Fits FR500 heads or 1999-2004 4V production heads
Throttle body location is correct for 1996-1998 Mustang
Cast from magnesium alloy for lowest possible weight
Computer not included.
Kit includes air meter, injectors and fuel rails
Note:Calibration recommended
|
T-5 WORLD CLASS TRANSMISSION
M-7003-Z* 1979-93 V-8 only
Heavy-duty “World Class” T-5 5 speed manual transmission with short throw shifter
300 ft./lbs. torque capacity
Gear ratios: 1st 2.95; 2nd 1.94; 3rd 1.34; 4th 1.00; 5th 0.63
Double moly 2nd speed, 3rd speed and countershaft cluster gears
Carbon fiber 3-4 blocker rings
Improved synchronizers and bearings
1.0625" diameter 10 spline input shaft
28 spline output shaft
7 tooth speedometer drive gear
Cobra style pocket bearing
Steel input bearing retainer
|
01-04 NEW T3650
`99-`04, GT & MACH 1, 4.6L T3650,5SPD(NEW FORD NOT REBUILT).THESE ARE VERY LIMITED,SO ONCE THEY ARE GONE, SO IS THIS PRICE. Don't miss out and order yours today. Ford part# 3R3Z-7003-CA(LIST PRICE $2580.00)
|
CONTROL PACK 4.6L 3V
M-6017-463V*
Take the complexity and mystery out of wiring a late model 4.6L 3V engine!
Designed to run M-6007-A463NA and M-6007-3V46 4.6L 3 Valve crate engines
Includes PCM with Ford Racing calibration
Includes Ford Racing cold air kit M-9603-GTB minus the Pro-Cal tool
(PCM included with the Control Pack already contains the Ford Racing calibration)
Includes Electronic Throttle Control accelerator pedal eliminates throttle cable routing problems
Unique harness connects to stock engine harness and is designed for streetrod installation
Features OBD-II port to assist in vehicle calibration upload and problem diagnosis
Includes unique downsized power distibution module, zip tub and MAF sensor with bolts
PCM with Ford Racing calibration requires return type fuel system, will not work with returnless fuel system
NOTE: Installation of this PCM in a 2005-09 Mustang GT will result in a no-start condition. See "Tip sheets" CALL 1-800-236-1156 TO ORDER
|
HOT ROD 350HP 3V ENGINE
M-6007-A463NA*
Look no further for the ultimate Ford "hot rod" engine, perfect for your street rod or kit car!
Features our throaty Hot Rod 3v camshafts, M-6550-3V
Weighs in at only 435lbs dressed!
Use our new wiring and installation kit M-6017-463V for easy install in any body style
Complete 3-valve 4.6L Mustang engine assembly
350hp @ 6200 rpm, 330 lb-ft of torque @ 4500 rpm
Aluminum block and cylinder heads
Composite intake manifold for light weight and intake charge temp reduction
Vehicle harnesses and computer not included
Includes manual transmission engine harness and flywheel
Includes Power Steering Pump and Pulley, A/C Delete, Accessory Drive BeltCALL 1-800-236-1156 TO ORDER
|
TRANSMISSION, CLUTCH CABLE
'79-'93, adjustable with billet quadrant. Adjust at the clutch fork.CALL 1-800-236-1156 TO ORDER
|
Click Picture For Details
|
|
|
#R078
1993 MUSTANG COBRA
93 COBRA 30K MILES
|
|
|
|
