03-04 COBRA DRIVETRAIN
2003 Cobra 4.6 DOHC SUPERCHARGED 390HP complete drive train with 61k miles.This will include engine,6SPD transmission,driveshaft,complete wiring,speedo cluster,ecu,complete fuel system with tank.THIS IS A GREAT KIT FOR A FFR CAR,STREET ROD,RESTO MOD,OR ANY KIT CAR.(I.R.S rearend does not come with this kit)***call 1-800-236-1156 ask for Robbie or Derek for more details**
*
|
08 SHELBY ENGINE
500 hp supercharged 5.4L DOHC engine
Original equipment in the 2008 SVT Mustang
500 hp @ 6000 RPM, 480 lb-ft of torque @ 4500 RPM
Fully dressed including accessories and supercharger
Does not include vehicle wiring and PCM
Calibration code 8S-253-AA
The most powerful Mustang production engine ever!
Perfect for your high-end project!***Call for availability***
|
2001 BULLITT WHEELS
2001 Bullitt wheels 17x8. These will fit any 1994-04 mustang.**NEW FORD** Set of four with caps
|
2008 MUSTANG GT GRILLE
05-08 GT Front grille assembly with fog lights and running pony. LIKE NEW******WILL NOT FIT V6
|
302 COBRA INTAKE
1993 Cobra intake manifold. Airflow is good up to 350+ horsepower. Kit includes upper intake manifold and lower intake manifold
Fits 1986-93 5.0L Mustangs or 1994/1995 Mustang with use of elbow. M-9424-Z51.
|
4.6L 3-VALVE MUSTANG GT ENGINE
Complete 3-valve 4.6L Mustang engine assembly
300 hp @ 5750 rpm, 320 lb-ft of torque @ 4500 rpm
Aluminum block and cylinder heads
Composite intake manifold for light weight and intake charge temp reduction
Vehicle harnesses and computer not included
Includes manual transmission engine harness and flywheel
|
4:10 RING GEAR
Ford Racing, 8.8, 4:10, M-4209-G410A, includes ring gear & pinion.
|
5.0L/302 – 340 HP GT-40 ALUMIN
302 cubic inch
340 hp @ 5500 RPM
9.0:1 compression ratio (nominal)
Forged pistons
Forged steel connecting rods
Hydraulic roller camshaft M-6250-E303, .498" lift intake and exhaust, duration at .050" is 220 degrees intake and exhaust
Double roller timing chain set M-6268-A302
Nodular iron crankshaft
Rear sump pan fits most Fox body cars
Ford Racing aluminum GT-40 cylinder heads M-6049-X303 with 1.94" intake valves and 1.54" exhaust valves
Roller rocker arms M-6564-B351
New block, oil and water pumps, oil pan, flywheel and harmonic balancer
Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks
Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required.
|
79-93 DOOR HANDLES
'79-'93, PAIR, includes LH (driver) & RH (passenger), EXTERIOR, BLACK, metal. Won't break in cold weather like the factory plastic ones.
|
79-93 NEW FORD WINDOW MOTOR
1979-1993 LH power window motor.These are NEW FORD.
not rebuilt. Ford gets 135.00 on rebuilt ones
|
86-93 FAN BLADE
'86-'93, 5.0L, 302, NEW AFTERMARKET. If your fan is cracked or broken up this is your fan
|
87-93 GT TAIL LIGHT
'87-'93, "NEW" NOS RH, (passenger) GT TAIL LIGHT (BLACK)
IN COLOR. FORD PART#F1ZZ-13404-B "Limited Quantity" We have RH.(passenger)ONLY!
|
94-95 COOLING FAN ASSEMBLY
'94-'95,NEW 5.0L and EARLY '96 4.6L, INCLUDES fan blade, shroud & motor.
|
94-98 Odometer Gear Kit
This is the drive & worm gear to fix your broken odometer & trip odometer. No need to replace the instrument cluster.
|
94-98 QUARTER GLASS
'94-'98, Coupe, LH (driver), NEW FORD
|
99-01 COBRA FOG LIGHT
99-01 Cobra,New ford fog light (part# xr3z-15200-ca)
ford list price 99.29***VERY LIMITED SUPPLY AT THIS PRICE***
|
99-04 GRILLE DELETE KIT
'03-'04,MACH 1 grille delete. Give your car the "COBRA/MACH 1" LOOK
|
99-04 HEAD LIGHTS
'01-'04, SMOKED headlights, fits ALL '99-'04 GT, COBRA, BULLITT, and STANDARD, includes LH (driver) & RH (passenger), NEW FORD.
|
99-04 HOOD SCOOP
'99-'04 GT hood scoop, NEW FORD. Fits any '99-'04 hood, by drilling attaching holes. Includes 7 mounting screws and 2 alignment posts. Hood scoop is in grey primer, ready for paint.
|
ALUMINATOR 4.6L DOHC LONG BLOC
4.6L (281 cubic inches)
8.5:1 compression ratio (nominal)
Forged pistons
H-beam connecting rods
Forged steel crankshaft
Aluminum block M-6010-A46SC
Blue cam covers M-6582-A54
Assembled long block with 2003-04 Mustang Cobra cylinder heads and camshafts
Includes 2003-04 Mustang Cobra timing chain cover, water pump, Cobra windage tray and oil pan
Fits 2003-04 Mustang Cobra
Built with all NEW PARTS
Does not include oil cooler/oil filter adapter
Built with current available parts. Photos and specs may vary
Shipping weight approximately 500 lbs
Shown with coil covers M-6067-A, sold separately
|
NEW 99-04 T3650
`01-`04, GT & MACH 1, 4.6L T3650,5SPD(NEW FORD NOT REBUILT).THESE ARE VERY LIMITED,SO ONCE THEY ARE GONE, SO IS THIS PRICE. Don't miss out and order yours today. Ford part# 3R3Z-7003-CA(LIST PRICE $2580.00)
|
T-5 WORLD CLASS TRANSMISSION
M-7003-Z* 1979-93 V-8 only
Heavy-duty “World Class” T-5 5 speed manual transmission with short throw shifter
300 ft./lbs. torque capacity
Gear ratios: 1st 2.95; 2nd 1.94; 3rd 1.34; 4th 1.00; 5th 0.63
Double moly 2nd speed, 3rd speed and countershaft cluster gears
Carbon fiber 3-4 blocker rings
Improved synchronizers and bearings
1.0625" diameter 10 spline input shaft
28 spline output shaft
7 tooth speedometer drive gear
Cobra style pocket bearing
Steel input bearing retainer
|
T-56 TRANSMISSION 6SPD
This is the same Tremec HD 6-speed manual transmission used in the 03-04 Cobra, 2000 Cobra “R” and the Ford Racing FR500 Mustang.
Fits 4.6L SOHC/DOHC engines
Can be used in 1999-01 Mustangs and Cobras.
99-01 require shorter driveshaft,6spd crossmember/trans mount and other minor modifications
440 lbs./ft. torque capacity
Gear ratios: 1st 2.97, 2nd 2.07, 3rd 1.43, 4th 1.00, 5th .80, 6th .62
Does not have mechanical speedometer connection needed for use in earlier Mustangs
10 spline input, 31 spline output
.These are new ford and comes with FREE SHIPPING WITHIN THE 48 STATES.
|
TKO 500
Gear ratios: 1st 3.27; 2nd 1.98; 3rd 1.34; 4th 1.00; 5th 0.68
Features improved shift forks, one-piece counter-shaft, gears made of 4615 steel which increases the torque capacity to 500 fpt
Input shaft is 10 spline 1.0625 and the output shaft is 31 spline
Requires a unique bellhousing M-6392-R58 to install in a 1979-95 Mustang
To fit in a 1979-93 Mustang use M-5059-A crossmember
To fit in 1994-95 Mustang, modify vehicle crossmember, lengthen driveshaft .625" and use clutch fork E6ZZ-7515-A
31 spline driveshaft yoke required
Can be used in 4.6L applications with bellhousing M-6392-M46
**FREE SHIPPING WITHIN THE 48 STATES**
|
Click Picture For Details
|
|
|
#ROBBIE 1
2006 ROUSH F150
Super Crew Cab 5.4 V8
|
|
|
|
